先日、僕と嫁は本屋さんにいって、育児の本を探してた。育児の本が並んでる近く本棚にはモバイル系の本が並んでいて、育児の本からモバイル系の本にうちの視線が移動された。ちなみに、なぜわざとその辺には育児と無関係の「モバイル系」本がおいてるんだろうよね。w
Windows MobileのROM焼きの本に目が留まっていたw
偶然にROM焼きの例はうちのもってるXperia X1の機種が採用されて手本があった。
実はさ、ROM焼きはもう久しぶりだし、OS入れ替えたら、またいろいろアプリを入れなおすことになるから、めんどくさくてそれを避けてるけど。最近のうちのXperia X1の状況を見たら、かなりよくバグまたエラーが出たりして、気になっていて、ネットで調べたら、自分の使ってるのより新しいファームウェアが出てるが知り、やっぱりやいてあげよと思った。
まず、上記のいってたそのWindows MobileのROM焼きの本の説明によると、基本的に、どんな機種でもROM焼きのあとうまくいかなくならないようにするため、ROM焼きの前に定番の手間はHard-SPLのアンロックだね。詳しい情報なら、xda-developersのほうがいいだろうね、上記のいってたその本だってよぉくxda-developersのを引用してるですし。
そのHard-SPL Unlockerのページには機種保証にこだわるユーザーに元のSPLを回復するパッチと方法も書いてあって実に関心しますね。
ビビってHard-SPLの解除してから、さっそく新しいファームウェアにアップした。「こちらはXperia X1のファームウェアの一覧表」
僕は見事にXPERIA X1 Generic Taiwan R2AA007からXPERIA X1 Generic Taiwan R3AA013に更新した。ROMフラッシュ方法は個人的にカードフラッシュのほうが安全とおもうため、それでした。
ちなみに、上記のいっていたROMのリリースされたのはもう去年のだし、そのROMを見つけ出すまでほんまにめちゃ苦労してた。ネットで調べたら、こんなとんでもないサイトが見つかった「Sony Ericsson XPERIA X1 firmware」が、ほとんどのRapidshareのリンクが消されていて、ダウンロードできなかった。しかし、Please Login or Register to read the rest of this content.
Hard-SPL Unlocker for Xperia X1 – Released!
Instructions to flash Hard-SPL:
it’s recommended you run the basic package, and don’t flash the other attachment (MFG SPL – it is only for hackers).
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d…DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi…ce-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment).
3) you must Have Phone Synced with PC in Windows Mobile!
4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh)
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).
7) Hard-SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.72.OliNex (or 0.52.OliNex MFG).
*** Flash X1 without PC – Micro SD Method ***
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally “ruu_signed.nbh”) to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the “volume down” button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction

Related posts:

















キムラと申します。この記事の中に出てくる書籍の名前を教えていただけませんか。いくつか
探して見ましたがまだ該当する本がみつかりませんでした。
>キムラさん、
ご来訪とコメントはありがとうございます。
その書籍の名前をよく覚えてなくて、教えられなくて大変申し訳ございません。
しかし、中国語の本ですから、日本の本屋さんに発売はちょっと難しいかもしれないですね。
それから、確かに、中華圏に緩いかもしれなくて、Unlockとかとんでもない話をしてる本でもあり、日本だとかなり敏感な本かもしれなくてなかなか手に入れないかもしれないですね。
ちなみに、僕はその本を読んだが、内容はほとんどxdaからの引用してるんですから、いっそとxdaのサイトでご覧になってほうがいいと僕が思いますよぉ。
http://forum.xda-developers.com
キムラです。中国語の本でしたか。それは読めないですね。X1をR3AA010まではupしてましたが日本語化WM6.5でどれが良さそうか(本体を新しくするのはおいといて)またムシが騒ぎ出してます。ありがとうございます。
>キムラさん、
自分の経験はみんなの参考になれて光栄です。
日本語化といえば、こちらのスレッドのROMでよろしいと思います。日本語化というより、リアル日本語ROMですからね。
http://forum.xda-developers.com/showthread.php?t=673852