X10 miniのAndroid2.1更新、root化及びAPP2SD「検証済み」

X10 miniのAndroid2.1更新、root化及びAPP2SD「検証済み」X10 mini之Android2.1更新,root機及APP2SD「已驗證」

X10 miniのAndroid2.1更新、root化及びAPP2SD「検証済み」この前は自分のX10の2.1更新とroot化とAPP2SDの記事を書いて、今度は嫁の持ってるX10 miniの同じ更新を書いてみた。  

まずはこちらのスレッド通りに2.1にフラッシュするんだね。  

X10 Mini 2.1 incl. Flashtool (Updated Flashtool 5.11.2010) – xda-developers  

Hi,  

With the flashtool you should be able to flash the phone to newst 2.1 Firmware.  

Download flashtool: (Update: 5.11.2010)
http://www-stud.uni-due.de/~sfanmakr…0Flash-2.1.zip  

Download X10 mini 2.1 firmware:  

E10i:
http://www.multiupload.com/GM4VW1LNVV Nordic
http://forum.xda-developers.com/show…49&postcount=1 UK (download from cocker80’s Thread)  

NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!  

Now put the firmware files in “firmware” directory of flashtool (overwrite loader.sin) and run X10flash.bat and follow instructions!  

Note: You have to disable Vista/7 UAC! If not you are running in problems !
You HAVE TO WIPE USERDATA! If Not you will be stuck in booting Loop!  

Regards
Bin4ry  

それから、X10のroot化の同じ方法で、こっちらのスレッド通りにやった。  

2.1 Root Method – Working on Nordic FW – xda-developers  

ROOT achieved for 2.1 nordic FW.

  

 

 

This requires you to have 2.1 already (either Nordic, or other generic, or using Bin4ry’s flashtool version here.
instructions and files as below.  


Download the SuperOneClick (files attached) or original post here

Updated Superoneclick version 1.5.4
v1.5.4
Fixed superuser install issue
Added a prompt to tell you to allow superuser on your phone, for the test.
Fixed unroot.  

It can take a while to ROOT – looks as though it is stuck in a loop. I thought it wasnt working but waited about 10mins and it worked.  

If you wait longer and it still doesn’t work, try untick/retick USB debug while it’s running  

Hey Presto – ROOT !  

それから、最後に、APP2SDの設定だね、またX10のやり方同じで、下記のスレッド通りに見事にした。  

[Howto] App2sd Step by step – xda-developers  

New version for 2.1 is out  

someone ask for a step by step guide here is it
You need a rooted device  

1.Step
Patitioning your sd-Card
forum .xda-developers.com/wiki/index.php?title=SD_card_partitioning
here is a great Howto for this
2. Step
plug on your device via usb to the computer
if you don’t have it enable usb debugging
now extract the zip from the Attachment into the root of your sdcard  

3. Step
open and adb shell with
Code:  

adb shell

now instert the folloing command
Code:  

sh /sdcard/app2sd.sh

4. Step
to install app2sd youst press enter
after some time your X10 should be reboot  

5 .step
on the boot after the wihte/black sony Logo
your telephone led will be are red or green  

blue means:
no proplem with sd card booting normal
purple/voilet means
sdcard malfunktion booting with failsafe  

info:  

to deinstall app2sd
please make step 1-3
but then you inster 1 and preass enter
then you must decide if you want
to move the apps from your sd-card to internal
then press 1 and hit enter
or you want the aps before you had install app2sd
then instert 2 and hit enter  

after some time your telephone will reboot
then app2sd is removed  

ps :
can onyone check if this work on the Xperia minni (pro)
because i don’t have it  

基本的に、2.1にしてroot化もAPP2SD化もできて、もう大丈夫だろうだが、X10miniのこのROMはX10のようなGlobal版違うから、中国語入力の入ってないんだ。それから、ラジオのapkも入ってないそう。ラジオならAnyRadioとかなんとかなり、それから中国語入力はHKIMEでも済むんだが、うちの嫁はX10miniのデフォルトの中国語入力にこだわってるため、やっぱりHK版の出たら、もう一度フラッシュするつもりだね。X10 mini之Android2.1更新,root機及APP2SD「已驗證」早前寫過我部X10之2.1更新,root機及APP2SD,今次認寫吓把我太太用緊部X10 mini的同樣更新.

首先如下面所寫的FLASH成2.1.

X10 Mini 2.1 incl. Flashtool (Updated Flashtool 5.11.2010) – xda-developers

Hi,

With the flashtool you should be able to flash the phone to newst 2.1 Firmware.

Download flashtool: (Update: 5.11.2010)
http://www-stud.uni-due.de/~sfanmakr…0Flash-2.1.zip

Download X10 mini 2.1 firmware:

E10i:
http://www.multiupload.com/GM4VW1LNVV Nordic
http://forum.xda-developers.com/show…49&postcount=1 UK (download from cocker80’s Thread)

NOTE THIS IS ONLY FOR MINI NOT FOR MINI PRO!!

Now put the firmware files in “firmware” directory of flashtool (overwrite loader.sin) and run X10flash.bat and follow instructions!

Note: You have to disable Vista/7 UAC! If not you are running in problems !
You HAVE TO WIPE USERDATA! If Not you will be stuck in booting Loop!

Regards
Bin4ry

之後,同X10的root機一樣,如下面所寫的照做.

2.1 Root Method – Working on Nordic FW – xda-developers

ROOT achieved for 2.1 nordic FW.

This requires you to have 2.1 already (either Nordic, or other generic, or using Bin4ry’s flashtool version here.
instructions and files as below.


Download the SuperOneClick (files attached) or original post here

Updated Superoneclick version 1.5.4
v1.5.4
Fixed superuser install issue
Added a prompt to tell you to allow superuser on your phone, for the test.
Fixed unroot.

It can take a while to ROOT – looks as though it is stuck in a loop. I thought it wasnt working but waited about 10mins and it worked.

If you wait longer and it still doesn’t work, try untick/retick USB debug while it’s running

Hey Presto – ROOT !

然後,最後,就係APP2SD的設定,又係同X10的做法一樣,按照下面的去做.

[Howto] App2sd Step by step – xda-developers

New version for 2.1 is out

someone ask for a step by step guide here is it
You need a rooted device

1.Step
Patitioning your sd-Card
forum .xda-developers.com/wiki/index.php?title=SD_card_partitioning
here is a great Howto for this
2. Step
plug on your device via usb to the computer
if you don’t have it enable usb debugging
now extract the zip from the Attachment into the root of your sdcard

3. Step
open and adb shell with
Code:

adb shell

now instert the folloing command
Code:

sh /sdcard/app2sd.sh

4. Step
to install app2sd youst press enter
after some time your X10 should be reboot

5 .step
on the boot after the wihte/black sony Logo
your telephone led will be are red or green

blue means:
no proplem with sd card booting normal
purple/voilet means
sdcard malfunktion booting with failsafe

info:

to deinstall app2sd
please make step 1-3
but then you inster 1 and preass enter
then you must decide if you want
to move the apps from your sd-card to internal
then press 1 and hit enter
or you want the aps before you had install app2sd
then instert 2 and hit enter

after some time your telephone will reboot
then app2sd is removed

ps :
can onyone check if this work on the Xperia minni (pro)
because i don’t have it

基本上,升了2.1之後可以root機同埋APP2SD,已經係沒有咩問題,不過X10mini呢個ROM唔似得X10般的Global版,所似係冇中文輸入法.另外,好似冇埋收音機的apk.收音機的話可以用AnyRadio總可搞掂,另外中文輸入可以用HKIME都可以,不過,我太太較識用X10mini預設的中文輸入法,所以始終都係當HK版出了之後,打算再FLASH多一次吧.

Share and Enjoy:
  • Print
  • Digg
  • StumbleUpon
  • del.icio.us
  • Facebook
  • Yahoo! Buzz
  • Twitter
  • Google Bookmarks
  • Add to favorites
  • Google Buzz
  • Live
  • MSN Reporter
  • MySpace
  • RSS
  • email

X10 miniのAndroid2.1更新、root化及びAPP2SD「検証済み」X10 mini之Android2.1更新,root機及APP2SD「已驗證」” への48件のフィードバック

  1. 謝謝你的文章,我很好奇,如果Mini裏面已經有裝了很多app,可以直接裝app2sd麼?

  2. >Kevin先生,
    謝謝您的到詐及留言.
    如果mini裏面已經裝了很多app,不建議直接裝app2sd,因為那個app2sd係會先把原已裝好的apk先於本機內作備份才把apk複製到sd,mini部機內的空間不多,好有可能係複製前的備份工序經已因空間不足而失敗.

    若果您唔想設回原廠設定才裝app2sd,怕所有野要重設,我可建議您用以下方法手動app2sd,不過只試過於X10上,未於mini上試過.希望可以幫到您.

    總算可以於X10上能夠APP2SD啦
    http://kagayakikun.com/zh/2010/10/08/somehow-xperia-x10-app2sd/

  3. 謝謝您的回覆

    我最終還是恢復了原廠設定后才裝了app2sd,現在挺好用

    不過我很好奇ext2分區中的結構,不知是否可以任意修改分區大小以及轉換成口碑更好的ext3分區

  4. >Kevin先生,
    ext2的分區大小修改,我估係可行的,因我原先是8GB卡,之後改用為16GB卡,用ghost把8GB卡內的ext2備份後還原到16GB卡上,此方法純轉移到另一張卡的ext2區,沒有修改大小,不過以相同方法,大概可行.

    把APP2SD轉到去新記憶卡的方法
    http://kagayakikun.com/zh/2010/10/18/moving-app2sd-to-new-sdcard/

    至於是否可轉成為ext3就真係唔清楚,可能真係要試過至知,不過現在的ext2都幾好啦.

    另外,若想瀏覽ext2內的內容的話,可於手機安裝Root Explorer再到以下路徑便可睇到架啦: /system/sd/

  5. help 呀………我到呢步先唔識做…….點算…help me..

    2. Step
    plug on your device via usb to the computer
    if you don’t have it enable usb debugging
    now extract the zip from the Attachment into the root of your sdcard

    help……
    睇唔明第3行呢句……………

  6. . Extract all the file from app2sd2.1.zip to the root of your sd card.

    做唔倒呢句….
    我LINK左部機去PC.. 但係得1個H DRIVE
    都冇ROOT 呢個FOLDER 係入面..
    HELP..

  7. 我放係第2度先..再斷開pc 開root explorer 係sd card move 落root folder 度 按完paste..都冇野係入面..

  8. 再加上我係電腦打Type

    cd /adb

    已經唔得..

    系統找不到指定的路徑..

  9. >KEN先生,
    謝謝您的到訪及留言,文章中的那個root不是資料夾之意,而是把app2sd內的所有檔案放到張記憶卡之根部(即是最上層),至於cd /adb那指令是相應你的Android SDK所在的位置而有異的,假設你的Android SDK放到電腦的D盤的根本,大概路徑為D:/android-sdk-windows/tools/adb.exe吧,希望可以幫到您.

  10. thanks!
    但係第二都係唔係好明:(
    sorry 呀 因為我係新手… 唔係太熟呢方面…可唔可以話我知點check 個位置?

  11. 同埋想問問呢 我係之前用z 4 root 黎root 的… 會唔會有影響? 因為我真係唔知sdk 係咩黎… 又唔想臨尾先做唔倒… thanks,!

  12. 同埋文章度話
    Make sure to unmount the sd
    card before continue the next step.
    In your pc open up a dos terminal box
    by typing cmd in the Search programs
    and files box

    我放好files 再unmount 手機畫面會叫我mount 番先再連接…咁點做之後step,?

    thanks…!

  13. 我開左ADB FOLDER 係DESKTOP IS IT OK?

    C:\Program Files\Android\android-sdk-windows\tools
    呢條係SDK 條PATH..

    咁我用 開始->執行-> 打CMD -> 開左DOS之後應該打咩?!?!?

    THANKS!!

  14. 我開左個dos 佢係C:\Documents and Settings\winuser>
    我接住要打d咩??
    thanks!!!

  15. >KEN先生
    tools資料夾內沒有adb.exe是正常,因sdk 0.8版本的adb路徑已變為platform-tools,而且要先於SDK Manager.exe內在相關下載更新方可.

  16. Make sure to unmount the sd card before continue the next step.

    then type

    sh /sdcard/app2sd.sh

    我去到呢步果陣…
    佢話sh: can’t open /sdcard/app2sd.sh

    咁我應該要點做?? 佢unmount意思唔係話即係連住手機但係拎番張sd card出黎???

    thanks.. last step了..

  17. >KEN先生
    unmount即解電腦連手機但記憶卡放回手機內
    mount即解電腦連手機並把記憶卡當作USB般令電腦可讀取
    若你用adb時輸入 sh /sdcard/app2sd.sh出現錯誤的話,即解打不到有關路徑而原因是記憶卡分配了比電腦作usb之用,故輸入指令前先要unmount後,那該指令才會找出有關路徑位置.
    另外,緊記在你app2sd之先,確認你是否已於記憶卡內分了一個ext2盤沒有.否則無法完成app2sd程序.

  18. 即mount the sd card 指手機連電腦 再另外用card reader 讀咭

    extract 完之後再取消card reader 掛接 將sd card 放回手機 才輸入cmd 開dos嗎?

  19. 但我就是不明白
    若我mount 時
    本身sd 在手機內
    那怎樣才算unmount?
    sd card 已在手機內
    如何再把sd 放回手機?
    不太明 這一點:(
    是不是要在手機按些什麼?

    thanks!

  20. >KEN先生
    當把電腦連接手機,選mount咗之後,電腦便會把手機識認出為USB DRIVE,那樣電腦便可瀏覽或修改手機的記憶卡內的檔案,可是與此同時,手機本身便無法同時間能讀取記憶卡內的資料了.

    adb的指令是相應於手機內的環境的.那麼 sh /sdcard/app2sd.sh這個指令,若在mount咗狀況下而執行的話,那麼adb永遠也無法能找出 /sdcard/的路徑,因手機mount了把記憶卡變為USB DRIVE讓電腦使用着.

  21. 噢@@ 原來就咁有apk
    不過希望我番到屋企用倒你教呢個啦:-)

    thanks for your information:D

  22. 我岩岩試左..做完晒d steps…reboot左.. 但係冇黑白logo.. 又冇燈..
    market dl apps 都係安番落手機度…..
    係咪仲要整d咩..?
    thanks…

  23. >KEN先生
    若要確認是否app已否安裝了在卡上的話,要檢視的不是記憶卡內的FAT32盤而是EXT2盤內的.
    你可以用root explorer登入以下路徑看看能否見到你所安裝好的軟件資料,另外確認那路徑的總容量是否與你所劃分的出容量相確.
    /data/app/

    P.S.=root explorer之頂部會顯示所處於之路徑的總容量.
    詳可參考本人所作的抓圖.
    http://kagayakikun.com/blog/wp-content/uploads/2010/11/201011052022.jpg

  24. 我果個root explorer 冇得睇– 可能版本唔同–

    我個data/app 一開出黎已經有我一向用緊果d apps ge apk 檔係度了 咁係代表乜?
    因為x10mini 內存得好少 所以成日係market 下載野又會話空間不足
    但整左之後諗住有d del 左 再安過就會落sd 點知睇mini info 依然係扣內存d 位…得番2x mb… sd 果度就2gb 冇改變…唔知點好:(

  25. >Ken
    你可以用root explorer到以下路徑是否看到你現存啲app,若沒有app所在又或者沒有該路徑存在的話,那便是APP2SD沒有成功或者FAT32及EXT2之分盤沒有成功.
    另外,APP2SD係會先把原有啲APP於手機內存作備份才把APP複製到SD內的.你可到以下路徑看是否發現有APP存在,那此APP係可以DELETE的,因純為備份而已.
    /system/sd/app/

    另外,你整APP2SD之前,手機內是否已安了某APP?最理想的做法是於沒有安裝任何APP的情況[即原廠設定後(需已root)的狀態]下做APP2SD的.

  26. thanks!

    我data/app 入面d 野
    應該係同 system/sd/app 入面ge 一樣呀
    咁我而家即係可以del 邊個先可以空番內存d 位?
    係呀… 已經安左唔少 因為唔想又整過晒d 野…

    thanks!

  27. >Ken
    /data/app/與/system/sd/app/的內容是一樣的,不用del,因那是symbolic link.

    你可用root explorer試到以下路徑看看會否有好多app在裏頭,若有的話可以del,因那路徑內的全都是備份而已.
    「/data/appbak」

  28. 佢入面又係有一堆應該一樣ge apk 檔呀… 我而家del 晒了

    由27 mb 變左96 mb@@

    咁即係之後果d 都係咁做?:O
    安完佢會兩邊有 then 再去appbak 度del?

    thanks,!!

  29. >Ken
    appbak的資料夾,當APP2SD成功才會出現的,而那個資料夾內的APP是未弄APP2SD之前的APP來的,appbak純為備份之用,可以把appbak內的所有APP刪除(appbak本身的資料夾可保留).

    另外,當你已成功APP2SD往後所安裝的任何APP都會自動到/data/app而不會再到appbak架啦,除非你再執行多一次APP2SD的設定式程,否則,appbak內的,刪除一次之後就可不用再理會了.

  30. 又是我…
    想問問有沒有原裝browser.apk…? 我而家用緊opera 但係我用wifi 用唔得… 連倒wifi 但上唔倒網… 記得以前用原裝browser 用wifi 時 會自動redirect 去一頁login page 叫我打user name 同pw… 而家冇左呢頁…上唔倒網:( 因為而家冇得無限上網了…
    thanks!

  31. 路過見到高人,我都有少少野想請教!
    經過千辛萬苦終於係今日成功裝到APP2SD (我都不知道是否成功)
    我是可以在 /data/app 看到146.32MB used, 716.20MB free, rw
    但用手機的設定/Quickoffice/linda manager…etc.查看SD咭’可用空間’時﹔卻發現是無法讀取資訊,而手機’可用空間卻是’21.33MB’
    我馬上嘗試下載一個22MB的程式’會說話的聖誔老人’,它亦馬上說我沒有足夠的空間..
    還有我是沒有看到手機上有 /data/appbak 這FLODER
    可否指點一下,
    謝謝!

    新年進步/happy new year.

  32. >KELU先生

    謝謝您的到訪及留言.
    您說你於 /data/app 可看到146.32MB used, 716.20MB free, rw = 那麽您是否仍記得,您那記憶卡分出第二盤時是否862.52MB(146.32MB+716.20MB)?

    若你查看SD咭時出現無法取讀資訊的話,好大可能是您把記憶卡分盤FAT32及Ext2時出現咗錯誤吧.

    另外,若APP2SD成功的話,應會自動生成以下路徑的/data/appbak,否則APP2SD應未有成功.

    您可否詳細說出您所作的步驟,讓我看看與我曾所作的會否有出入.

    新年進步+身體健康.

  33. 謝謝你的回覆!
    我現在的8GB SD咭是分了三組partition
    FAT 32 – CAPACITY 6.35GB, USED 1.8GB (FAT 32 裡有4MB 為unallocated)
    EXT 2 – CAPACITY 876MB, USED 159.5MB ( 不知內裡用了作什麼/ 可能新apps ??)
    EXT 3 – CAPACITY 200MB, USED 11.84MB (亦不知道用了作什麼/just info header??)
    我覺得現在比較混亂,所以想重新再來一次!

    1. Backup FAT32 data to harddisk ( I’m not sure only copy the data / need to use as Ghost program to make image to backup .)

    2. Format sd card & make partition again.
    FAT 32 tends to 7GB,
    EXT2 tends to 1GB.

    3. paste /restore the data to FAT32 ( don’t know work or not ?)

    4. use SDK once to install app2sd as your method.

    May be I’m using Motorola milestone, this memory/RAM no more so much. Even successful to install app2sd, it still have not enough space problem..

    Do you have any experience for backup SD card ?

    Thanks.

  34. >KELU先生
    依您所述的弄法,我大概估計問題應出在於那4MB的unallocated吧.

    建議您可重新為張記憶卡作分區,可依您所寫的第二點:[第一分區為:FAT32=7GB][第二分區為:Ext2=1GB].

    有關備份記憶卡內容,FAT32大概可以與一般的copy&paste應該可以吧.至於Ext2方面,建議您可用ghost來弄.

    Ext2之備份可到以下文章作參考.

    把APP2SD轉到去新記憶卡的方法
    http://kagayakikun.com/zh/2010/10/18/moving-app2sd-to-new-sdcard/

コメントを残す